 |
VISION EXTENDED WARRANTY PLANS
Protect your investment with an extended service plan before your warranty expires! Extended Service Plans cover the cost of service parts, labor, and annual preventive maintenance completed at the factory. For more information or to purchase a service plan, please call our technical support department at 602-439-0700.
Extended Warranty Express |
 |
MULTI MAT
Multi Mat eliminates the need for double stick tape, clamps, vacuum tables, and most other hold down methods on many engravable items. Multi Mat will hold most types of engraving stock, including brass, aluminum, plastic, and acrylic. Just press it into place on any size engraving table and you’re ready to go, and because Multi Mat is produced with a special rubber coating on both sides, it cleans easily for extended use. Multi Mat Buy Now
|
 |
WEDGE CLAMP
Simply slide the clamp onto the T-slot table surface and position it over the edge of the engraving stock. The downward clamping force eliminates bowing and problems. This clamp can be used with material up to 1/4” thick. Fits all Vision T-slot tables.
Wedge Clamp Buy Now
|
 |
EDGE CLAMP
This clamp is designed to secure engraving materials from the top surface and avoids bowing in most applications. This clamp will hold material thicknesses of .020, .032, .062, and .125 by rotating the clamp and tightening a thumbscrew. Fits all Vision T-slot tables. Edge Clamp Buy Now
|
 |
CORNER CLAMP
This clamp is designed to hold down square or rectangular plates. By lining up the “V” cut-out of the clamp with the corner of the plate, the engraver is allowed maximum engraving space. It will accommodate material as thin as 1/32”. Fits all Vision T-slot tables. Corner Clamp Buy Now
|
 |
SMALL SELF CENTERING VISE
For use with Express, VE810, Phoenix 1212, 1612 and the 1624
This fixture allows you to hold various small items such as nameplates. Dowel pin settings allow this item to work with most Vision fixtures for even more versatility.
Small Self Centering Vise Buy Now
|
 |
UNIVERSAL CLAMPING BARS w/MEDALLION HOLDER
These clamping bars hold small flat items, including name badges with pin backs, securely. By rotating the clamping bars they will hold 1 to 3 round objects at a time. This allows you to engrave multiple notary seals, coasters, paperweights, and a variety of other circular items. With a place for the “eye” of medallions, this clamp adapts to any vise or table that has a T-slot system.
Universal Clamping Bars w/Medallion Buy Now
|
 |
PEN & MEDALLION FIXTURE
This is a double-sided fixture that when turned in one direction accommodates a pen and when turned in the other direction accommodates a medallion, seal, or other circular item. With a space for the “eye” of the medallion, this fixture is usable with the Versa Vise or Quick-Lock vise. Fits all Vision T-slot tables.
Pen & Medallion Fixture Buy Now
|
 |
PUSH-DOWN CLAMP
This double-sided clamp secures items from the edge. It is ideal for items that are being cut, contoured, or engraved. Fits all Vision T-slot tables.
Push Down Clamp Buy Now
|
 |
UNIVERSAL
PIN FIXTURES
Available for the Versa Vise, Quick-Lock Vise, Vision T-slot table, and Self-Centering Vise. These fixtures enable engraving on all unique-sized pens, lighters, knives, key-chains, and many other
irregular-shaped items. Universal Pin Fixture Buy Now |
 |
SEAL FIXTURE
This fixture enables engraving on 1 5/8" & 2" diameter notary seals, medallions, coasters, paperweights, and other round objects. Can be used with the Quick-Lock or Versa Vise. Fits all Vision T-slot tables. Seal Fixture Buy Now
|
 |
QUICK-LOCK VISE
This vise is specifically designed for T-slot table users. Its “cam” type locking device allows for quick changing of parts. Supplied with a removable front clamping plate which allows for holding thicker items. Fits all Vision T-slot tables.
Quick-Lock Vise Buy Now
|
 |
QUICK-LOCK LEATHER BRACELET AND KEYCHAIN VISE
This piece of engraving equipment is specifically made for engraving leather bracelets and keychains. Designed to work with any Vision T-slot Table, it features a removable front clamping plate with a "cam" type locking device.
Order bracelets and keychains at sunshineleatherid.com
Note: Design specific to be used with leather bracelets and keychains from sunshineleatherid.com
Quick-Lock Leather Bracelet and Keychain Vise Buy Now
|
 |
DIAMOND DRAG ADAPTER
The DIAMOND DRAG ADAPTER screws onto the end of almost any spindle and allows simple & solid mounting for diamond scratch engraving. Spindle bearing strain is totally eliminated using this devices. Diamond Drag Adapter Buy Now
|
 |
BURNISHING ADAPTOR
Designed to assist in burnishing lacquered brass and anodized metals with just the right amount of pressure. Also used to mark glass. Available in
1/8”, 11/64”, 1/4”, 4mm and 6mm sizes.
Burnishing Adapter Buy Now
|
 |
CUTTER WRENCH
Durable aluminum handle “Vision” cutter wrench.
Cutter Wrench Buy Now
|
 |
VACUUM CHIP REMOVAL SYSTEM
Quiet vacuum pump for removing engraving chips. The unit has a large filtered canister with replaceable collection bag. Includes vacuum nose cone and kink resistant
hose.
Vacuum Chip Removal System Buy Now
|
 |
VACUUM CHIP REMOVAL NOSES
Designed for chip removal while doing cutouts. Nose is constructed of durable plastic. Vacuum
tube allows for hookup to vacuum pump or shop vac.
Vacuum Chip Removal Noses Buy Now
(Inserts are changeable and/or replaceable)
A. Large opening style is designed for engraving large letters.
B. Small opening is designed for tight places
and small letters. |
 |
EXPRESS MOTOR BELT
Made of durable 1/8”urethane for long wear and better traction. Minimum purchase of 2 belts required when ordering. Call to purchase.
|
Technical Specs
Accessories
